Fine Italian Venetian Plaster Importers
Note: All colors are shown for reference purpose only and may vary from the colors shown due to differences in your monitor color settings. Please make sure to review the OIKOS color chart before placing your order for more accurate presentation of our paint products.
Home > Products By Line > Facade Division > Blankor
BLANKOR is a special pigmented, infilling, primer for exteriors. It consists of acrylic resins in water dispersion and titanium dioxide fillers. The product is highly pervasive, consolidates the surface and makes the absorption uniform. Thanks to its excellent hiding power, it allows saving on finishing products. BLANKOR can be applied on alkaline substrates, civil plasters, rough plasters, old walls, chalking or highly absorbent plasters. It has a low odour level, is, noninflammable and friendly to both humans and the environment.
Apply on thoroughly dry surfaces. New plasters need at least 30 days for maturation and allowing complete carbonation process. Sand down or strip surfaces in order to remove imperfections and any loose or flaking materials. When restoring, leaks and water infiltration problems have to be solved.
Apply one coat of BLANKOR by OIKOS diluted with 50 ÷ 80% drinkable water by using a brush, roller or spray gun (1.7 mm nozzle). Allow 6 ÷ 8 hours to dry before coating with decorative finishes. Finish sec. 5 Decorative finishes of the Top Exterior Line
Dilution: Dilute with 50 ÷ 80% drinkable water
Yield: 14 ÷ 18 m2/lt in one coat approx. depending on the substrate absorption
Application tools: Brush, roller or spray gun (1.7 mm nozzle)
Application temperature: +5°C ÷ +36°C (When relative humidity not over 80%)
Drying time: tack free 1 ÷ 2 hours (temperature = +20°C with relative humidity not exceeding 75%)
Drying time: fully cured 10 ÷ 12 hours (temperature = +20°C with relative humidity not exceeding 75%)
Drying time - painting over: 6÷8 hours
Tools: cleaning Water
Composition: Acrylic resins in water dispersion, high coverage fillers, titanium dioxide, organic and inorganic pigments and preservatives to aid application and the formation of the surface film.
Specific weight: 1.37 kg/l +/- 3% (White)
pH:8 ÷ 9
Viscosity: 20,500 +/-5% CPS Brookfield (RVT 20 revs/min. a 25°C)
Storage temperature: +2°C ÷ +36°C. Keep from freezing.
Fire reaction: Negative when applied onto not flammable surfaces. It is a waterbased product with dry thickness less than 0.60 mm
Resistance to tear and adhesion: In compliance with DIN ISO 4624 standard: tear resistance 1.3 N/mm2, cohesion crack under the paint working range
Available colours: White + Color Chart
Emission limits of Volatile Organic Compounds (VOC) according to directive 2004/42/CE: Classification: A/h; VOC: 20 g/l (max); Limit Phase I (from 01/01/2007): 50g/lt, Limit Phase II (from 01/01/ 2010): 30g/lt
Packaging: 1 – 14 Lt
Toxicological Data: The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is considered to be a non dangerous substance if used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. etc. and then disposed of in accordance with the regional and national regulations in force at that time.
Currently displaying items 1 to 30 of 59. Click below to navigate through the entire listing.