Fine Italian Venetian Plaster Importers
|
Note: All colors are shown for reference purpose only and may vary from the colors shown due to differences in your monitor color settings. Please make sure to review the OIKOS color chart before placing your order for more accurate presentation of our paint products. Home > Fundgrap FUNDGRAP Technical CharacteristicsFUNDGRAP by OIKOS is a special solvent free primer, ideal for surfaces where adhesion is difficult such as zinc laminates, wood, PVC, plastic laminates and aluminum. Conforms to the norm DIN 53 778. It is odourless, non toxic, non flammable and environmentally friendly. Ideal UseNon porous surfaces and surfaces where adhesion is difficult such as zinc laminates, wood, PVC, plastic laminates and aluminum. Surface PreparationCarefully clean the surface to be coated, remove any grease using suitable products and sand down with fine sand paper. Application MethodApply one coat of FUNDGRAP by brush, roller or spray gun. Wait 6 ÷ 8 hours before proceeding with further applications. Dilute the product according to the tool used in application. Finishing / ProtectiveSolvent free decorative paints and coatings. Technical Characteristics: ApplicationDilution: 10 ÷ 20% drinkable water depending on the tool used in application Yield: 10 ÷ 12 m2/l Application tools: brush, roller or spray gun (nozzle 1.7 mm) Application temperature: +5°C ÷ +36°C (with relative humidity not exceeding 80%) Time until fully cured: 6 ÷ 8 hours hours (temperature = 20°C with relative humidity at 75%) depending on the surface Drying time for painting over: 6 ÷ 8 hours (temperature = 20°C with relative humidity at 75%) depending on the surface Tools cleaning: water Time until fully cured: 20 to 25 days (temperature = 20°C with relative humidity at 75%) Technical Characteristics: The ProductComposition: acrylic resins in water dispersion, organic and inorganic pigments and additives to aid application and the formation of the surface film. Specific weight: 1.38 kg/l ± 3% pH: 8.5 ÷ 9 Viscosity: 7,000 ÷ 17,500 CPS Brookfield (RVT 20 revs/min. a 25°C) Storage temperature: +2°C to +36°C. Keep from freezing Fire reaction: negative if applied on to a non flammable surface, water based material with a dry thickness of less than 0.600 mm Resistance to washing: conforms to the norm DIN 53 778, resistant to at least 1000 abrasive cycles Resistance to abrasion: conforms to the norm DIN 53 778, resistant to more than 5000 abrasive cycles Colours: white + colours of the “Shades of White” color chart Packaging: 1 – 4 litres |