Fine Italian Venetian Plaster Importers
|
Note: All colors are shown for reference purpose only and may vary from the colors shown due to differences in your monitor color settings. Please make sure to review the OIKOS color chart before placing your order for more accurate presentation of our paint products. Home > IL Primer IL Primer
Technical CharacteristicsIL PRIMER is a special, infilling, adhesive primer, ideal for rustic plasterwork, civil plaster, gypsum plasters, alkaline surfaces, loose and crumbling plaster, old wall surfaces and highly porous substrates in general. The product permeates deeply, consolidating the support, and is highly vapour permeable and consolidating. It consolidates the substrate on to which it is applied making the plaster more compact, thus enabling easy anchorage of lime based products, old style stuccos, screeds, paints which are applied thickly, decorative glazes and slightly uneven, old style, decorative finishes. The product has a low level of odour, is non inflammable and is friendly to both humans and the environment. Ideal UseInterior Walls Applications Application MethodClean the surface, removing any loose material. Apply one coat of a primer of IL PRIMER by OIKOS, so to obtain a perfectly insulated surface ready for the application of finishing products. Dilute IL PRIMER between 50% and 100% with drinkable water, depending on the state of the substrate. Proceed to apply, by brush, roller or spray gun, a single coat of the product. Wait 6 hours before continuing to apply the finishing coats. With new plasters, ensure that the substrate is thoroughly dry and mature. IL Primer should be used for the following products:KREOS, RAFFAELLO DÉCOR STUCCO, MADREPERLATO, COCCIO ANTICO e CEMENTO and any other OIKOS Products to be applied in Interiors. Technical Characteristics: ApplicationDilution: less absorbent surfaces: 50% drinkable water. normally absorbent surfaces: 75% drinkable water. highly absorbent surfaces: 100% drinkable water. Yield: 15-20 m2/l according to surface absorption Application Tools: Brush, roller or spray gun (1.7 mm nozzle) Application temperature: +5°C ÷ +36°C (with relative humidity not exceeding 80%) Drying time: tack free 1-2 hours (temperature =20°C with relative humidity less than 75%) Drying time: fully cured 10-12 hours (temperature =20°C with relative humidity less than 75%) Drying time: painting over 6-8 hours (Temperature =20°C with relative humidity less than 75%) Tools cleaning: Water Technical Characteristics: The ProductComposition: Acrylic resins in water dispersion, titanium dioxide fillers, additives helping application and film formation Specific weight: 1.35 Kg/l ±3% ph: 8.5-9 Viscosity: 17,000 +/-5% CPS Brookfield (RVT 20 revs/min. a 25°C) Storage temperature: +2°C ÷ +36°C. Keep from freezing Fire reaction: Negative when the product is applied onto a non flammable surface: water based material with dry thickness of less than 0,600 mm Emission limits of Volatile Organic Compounds (VOC) according to directive 2004/42/CE: Classification: A/h; VOC: 8g/l (max); Limit Phase I (from 01/01/2007): 50g/lt, Limit Phase II (from 01/01/ 2010): 30g/lt Colours: White Packaging: 1- 2.5 - 4 - 14 Liters Toxicological Data: The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is considered to be a non dangerous substance if used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. etc. and then disposed of in accordance with the regional and national regulations in force at that time. |
Click Here to view data sheet (PDF)