DecoFinish

Technical Characteristics

OTTOCENTO by OIKOS is a vapour permeable coating that thank’s to its formulation, based on resins in water dispersion and special metallic pigments, can create decorative patterns over the surface through contrasts of light and dark, given to the product during application, as one con see in the precious silk velvet wall coverings used during the European renaissance period. It is odourless, non toxic, non flammable and environmentally friendly.

Ideal Use

Decoration of walls and interior surfaces.

Surface Preparation

Clean the surface to be decorated, removing any loose material. For old or powdery surfaces it is advisable to apply a coat of either NEOFIX or CRILUX by OIKOS. For rough or uneven surfaces, screed over first with PASTE SCREED FOR WALLS by OIKOS.

Application Method

Prepare the base by applying one or two coats of SUPERCOLOR by OIKOS by short hair roller, in the colour indicated on the colour chart diluted with 40% drinkable water.

Once dry after 4 ÷ 6 hours proceed to apply OTTOCENTO according to the type of finish desired. ANTICO VELLUTO effect.

Apply OTTOCENTO in an irregular fashion using a medium size Stainless steel trowel until the whole surface has been covered. Before the product dries, pass over the surface moving the product with a clean trowel in order to obtain the desired two – tone velvet effect. The application and working of the product do not create problems of joins in as much as OTTOCENTO, smoothed over and squashed by the trowel during application, compacts itself and flattens in an even fashion between one area and another.

IMPERIALE/DAMASCO effect. Apply two coats of OTTOCENTO diluted with 50% drinkable water, using a short hair roller, leaving 6 ÷ 8 hours between coats; Once dry, create the decorative IMPERIALE effect by dabbing the surface with a tampon or for the decorative DAMASCO effect, using a marine sponge, in both cases using the same color of SUPERCOLOR by OIKOS as was used for the base coat, diluted with 70 ÷ 80% drinkable water..

Finishing / Protective

To protect and make a fully washable OTTOCENTO, apply when the product is fully cured the special transparent protective coat WATINS LUX or IGROLUX by OIKOS.

Technical Characteristics: Application

Dilution: To protect and make a fully washable OTTOCENTO, apply when the product is fully cured the special transparent protective coat WATINS LUX or IGROLUX by OIKOS.

Yield: 7 ÷ 8 m2/l depending on the desired effect

Application tools: Medium size Stainless steel trowel, short hair roller, tampone, marine sponge by OIKOS

Fixatives: NEOFIX or CRILUX by OIKOS

Base coat: SUPERCOLOR by OIKOS as indicated in the colour chart

Protections: WATINS LUX or IGROLUX by OIKOS

Application temperature: +5°C to +36°C (with relative humidity not exceeding 80%)

Take free time: 1 ÷ 1.30 hour (temperature = 20°C with relative humidity not exceeding 75%)

Time until fully cured: 7 days (temperature = 20°C with relative humidity at 75%)

Tools cleaning: water

Technical Characteristics: The Product

Composition: resins in water dispersion, organic and inorganic pigments and special metallic pigments.

Specific weight: 1.08 kg/l ±3%

pH: 6.5 to 7.5

Viscosity: 14,000 to 18,000 CPS Brookfield (RVT 20 revs/min. a 25°C)

Storage temperature: +2°C to +36°C. Keep from freezing

Fire reaction: negative if applied on to a non flammable surface, water based material with a dry thickness of less than 0.600 mm

Water vapour permeability (SD): 0.24 m (max allowed limit 2 m, DIN 52 615)

Colours: colour chart

Packaging: 1 - 5 litres