Fine Italian Venetian Plaster Importers
Note: All colors are shown for reference purpose only and may vary from the colors shown due to differences in your monitor color settings. Please make sure to review the OIKOS color chart before placing your order for more accurate presentation of our paint products.
Home > Products By Line > Decor Division > Pallas
PALLAS by OIKOS is an even colour, silk finish, decorative paint that is characterised by the varying reflections that change depending on the intensity of the light. PALLAS satisfies the most sophisticated decorative needs, rekindling the antique splendour of wall tapestries that once adorned the interiors of the most luxurious villas. The product is water based and is composed of high-tech resins that make it washable and give it sanitising properties. It is odourless, nontoxic, non-flammable and environmentally friendly.
Decoration of walls, indoor furniture, any laminated surface, P.V.C., metal and wood.
Clean the surface thoroughly and remove any loose material; fill in holes or cracks and render the wall perfectly smooth. Apply two coats of SUPERCOLOR by OIKOS in the colour indicated in the colour chart.
In case of substrates such as: zinc sheets, laminates and other materials with smooth surfaces, clean and degrease the surface with appropriate products; apply a coat of special fixative FUNGRAP by OIKOS, on new wood apply NOVALIS FILLING AGENT by OIKOS; followed appy only one coat of SUPERCOLOR by OIKOS.
First coat: spray the product on the surface directing the gun from right to left and vice-versa first, and then from top to bottom and vice-versa without any interruption between the direction change. Set the nozzle horizontally when spraying from left to right and set it vertically when spraying from top to bottom. The crossing of the spray jets determines a uniform application of the product.
Second coat: once the first coat has dried, 3 ÷ 4 hours after its application, repeat the same procedure as per the first coat.
To better protect PALLAS from wear and aging, apply on top of it the special transparent and protective varnish WATINS LUX or IGROLUX by OIKOS.
Dilution: 10 ÷ 20% drinkable water
Yield: 3 ÷ 4 m2/l in two coats
Application tools: 3 ÷ 4 m2/l in two coats
Fixatives: FUNDGRAP or NOVALIS FILLING AGENT by OIKOS according to the type of surface
Base coat: SUPERCOLOR by OIKOS
Protections: WATINS LUX or IGROLUX by OIKOS
Application temperature: +5°C to +36°C (with relative humidity not exceeding 80%)
Tack free time: 1 to 2 hours (temperature = 20°C with relative humidity not exceeding 75%)
Time until fully cured: 12 to 15 days (temperature = 20°C with relative humidity at 75%)
Tools cleaning: water
Composition: special acrylic resins in water dispersion, pearlescent pigments.
Specific weight: 1 kg/l ±3%
pH: 8.5 to 9
Viscosity: 7,000 to 10,000 CPS Brookfield (RVT 20 revs/min. a 25°C)
Storage temperature: +2°C to +36°C. Keep from freezing
Fire reaction: negative if applied on to a non flammable surface, water based material with a dry thickness of less than 0.600 mm
Water vapour permeability (SD): 0.09 m (max allowed limit 2 m, DIN 52 615)
Washed resistance: conforms to the norm DIN 53 778: resists to at least 1000 abrasive revs
Abrasion: conforms to the norm DIN 53 778: resists to at least 5000 abrasive revs
Cleanness effect: conforms to the norm DIN 53 778: paint coat free from dirt with less than 800 abrasive cycles
Colours: colour chart
Packaging: 1 - 5 litres
Currently displaying items 1 to 30 of 67. Click below to navigate through the entire listing.